Uniklean® HL-103 Buffing Residue Detergent

Uniklear® HL-103 buffing residue detergent is formulated for removing the residues remained after buffing on the surface of plastics. There are many advantages including:

A   Perfect emulsifying power and excellent detergency for removing buffing residues.

B   Environmentally friendly formula, containing neither ammonia nitrogen, phousphors, nor other harmful substances, and easy to pass RoHS test.

Uniklean^® HL-308 Ultrasonic Detergent

Uniklean® HL-308 ultrasonic detergent is formulated for cleaning  plastics with the aid of ultrasonic vibration before electroplatingThere are many advantages including:

A   Perfect emulsifying power and excellent detergency for cleaning contaminants.

B   None silicates contained which is befitting for high quality electroplating of plastics.

C   Environmentally friendly formula, containing neither ammonia nitrogen, phousphors, nor other harmful substances, and easy to pass RoHS test.

Uniklean^® HL-301 Acidic Detergent

Uniklean® HL-301 Acidic detergent is formulated specially for cleaning  plastics without buffing before electroplating. There are many advantages including:

A   Perfect emulsifying power and excellent detergency for cleaning contaminants.

B   Shorter procedure due to the same acidity with subsequent procedure.

C   Environmentally friendly formula, containing neither ammonia nitrogen, phousphors, nor other harmful substances, and easy to pass RoHS test.

Uniklear^® ENC-30 Colloidal Palladium Catalyst

Uniklear^® ENC-30 colloidal palladium catalyst is specially formulated to catalyze the metalizating process for plastic electroplating. Its process characteristics list as follows:

A   A palladium salt content of 8.00 g/l (calc as PdCl₂).

B   Excellent catalytic activity.

C   Advanced formula, excellent colloid protecting, not easy to decompose.

D   Environmentally friendly formula, containing neither ammonia nitrogen, phousphors, nor other harmful substances, and easy to pass RoHS test.

Uniklear^® ENC-40 Accelerating Agent

Uniklear® ENC-40 accelrerating agent is specially formulated to accelerate the metalizating process for plastic electroplating. Its process characteristics list as follows:

A   Enhance the subsequent nickel coating speed in a controlled state.

B   Less chance to cause either over-coating on the insulution surface, or skip-coating on the catalysed surface.

C   Wide span of processing conditions.

D   Environmentally friendly formula, containing neither fluoride, nor other harmful substances, and easy to pass RoHS test. 

Uniklear^® ENC-50 Electroless Nickel Plating Process

Uniklear® ENC-50 electroless nickel plating process is specially formulated to plate electrolessly a layer of Ni-P deposits on plastics before electroplating. Its process characteristics list as follows:

A   The bath is very stable with a service life of more than two years.

B   Perfectly meets the quality requirements of plastic electroplating.

C  There is less need to adjust the PH value frequently, thus a mass of ammonia can be saved. 

D  It is easy to meet the emission standards required by the industry park for discharging cleanse water, because of less ammonia used.

F   Does not contain harmful metals and can pass various tests such as RoHS and REACH.